Jackson Power Steering » Hydraulic Components http://jacksonpowersteering.com Customized Power Steering For Tractors And Equipment Fri, 21 May 2010 00:16:31 +0000 http://wordpress.org/?v=2.8.6 en hourly 1 Vane Loader Pump http://jacksonpowersteering.com/2009/04/29/loader-pump/ http://jacksonpowersteering.com/2009/04/29/loader-pump/#comments Wed, 29 Apr 2009 11:27:48 +0000 Roland Jackson http://jacksonpowersteering.com/?p=512 vane-loader-pumpI recommend a vane pump over the gear pump for several reasons.  First, the vane pump is very efficient, pumping more gallons per engine revolution then the gear pump.  Also the vane pump is much better in cold weather as the vanes do not come out to pump oil until the spinning of the turning shaft forces them out.  By that time the engine has started.  What that means is that the battery and starter didn’t have to start a cold engine and pump oil at the same time.  You can reconize a vane pump by it’s distinctive “whine” .  If taken care of, it will outlast a gear pump.  Vane pumps come in different gallons per minute.  I will size the vane pump to match your tractor’s engine so the loader is very responsive without lugging the engine.

]]> http://jacksonpowersteering.com/2009/04/29/loader-pump/feed/ 0 Adjustable Priority Flow Valve http://jacksonpowersteering.com/2009/04/19/314/ http://jacksonpowersteering.com/2009/04/19/314/#comments Sun, 19 Apr 2009 15:04:49 +0000 Roland Jackson http://jacksonpowersteering.com/?p=314 adjustable-priority-flow-valve

]]> http://jacksonpowersteering.com/2009/04/19/314/feed/ 0 Priorty Flow Valve with relief http://jacksonpowersteering.com/2009/04/19/priorty-flow-valve-with-relief/ http://jacksonpowersteering.com/2009/04/19/priorty-flow-valve-with-relief/#comments Sun, 19 Apr 2009 16:01:51 +0000 Roland Jackson http://jacksonpowersteering.com/?p=311 power-steering-priority-flow-valve-with-relief

]]> http://jacksonpowersteering.com/2009/04/19/priorty-flow-valve-with-relief/feed/ 0 Power Steering Cylinder http://jacksonpowersteering.com/2009/04/01/power-steering-cylinder/ http://jacksonpowersteering.com/2009/04/01/power-steering-cylinder/#comments Wed, 01 Apr 2009 15:31:16 +0000 Roland Jackson http://jacksonpowersteering.com/?p=328 power-steering-cylinder-with-swivel-ends1

The power steering cylinder has 8.75″ stroke, however, we can shorten the stroke to meet your needs.  The cylinder ram has 5/8″ fine threads and are about an inch long.  The cylinder is rebuildable as it uses common inexpensive  o-rings that can be purchased at any auto parts store. 

]]> http://jacksonpowersteering.com/2009/04/01/power-steering-cylinder/feed/ 0